Main_banner02
Main_banner02
Main_banner02
Main_banner02
Main_banner02
Main_banner02
Main_banner02
Main_banner02
Main_banner02
main_banner02
main_banner03
main_banner08
main_banner10
Banner 8
MAKLUMAT_BAHARU_BERKENAAN_PEMASANG_PEMERIKSAN__PENYELIA_PERANCAH_TIUB_5.jpg
MAKLUMAT_BAHARU_BERKENAAN_PEMASANG_PEMERIKSAN__PENYELIA_PERANCAH_TIUB_5.jpg
Pelaporan Penyakit dan Keracunan Pekerjaan (JKKP7) - copy
Pelaporan Penyakit  dan Keracunan Pekerjaan (JKKP7) - copy
CIMSEN.png
CIMSEN.png
Guidelines On Medical Surveillance Programme at The Workplace 2023
Guidelines On Medical Surveillance Programme at The Workplace 2023
Maklumat Terkini Tindakan Pendakwaan dan Kompaun - copy
Maklumat Terkini Tindakan Pendakwaan dan Kompaun - copy
Borang Pemberitahuan Borang JKKP 5
Borang Pemberitahuan Borang JKKP 5
E- Banner Pelaporan
E- Banner Pelaporan
PERMOHONAN DAN PEMBAHARUAN KOMPETENSI MELALUI SALURAN YG BETUL
PERMOHONAN DAN PEMBAHARUAN KOMPETENSI MELALUI SALURAN YG BETUL
Guidance For Employer on the preparation of noise control - copy
Guidance For Employer on the preparation of noise control - copy
Garis Panduan Pengurusan Keselamatan Silinder Domestik Gas Petroleum Cecair (GPC) dan Pepasangan 2023 - copy
Garis Panduan Pengurusan Keselamatan Silinder Domestik Gas Petroleum Cecair (GPC) dan Pepasangan 2023 - copy
Laporan Pencapaian OSHMP2025
Laporan Pencapaian OSHMP2025
Construction Work
Construction Work
WORK AT HEIGHT
WORK AT HEIGHT
Hebahan Risalah TS3P1A4
Hebahan Risalah TS3P1A4
Infografik Teladan Kemalangan (ITK)
Infografik Teladan Kemalangan (ITK)
OSHMP 2021 - 2025
PELAN INDUK KESELAMATAN DAN KESIHATAN PEKERJAAN 2021 -2025 (OSHMP25)
"KKP Inklusif-Kebersamaan dan Komitmen"
Image is not available
OSHMP 2021 - 2025
previous arrow
next arrow
banner6
Banner03
Banner05
Permohonan bagi peperiksaan Jurutera Stim / Enjin Pembakaran Dalam - copy
9db9ffd235c59a7f51b37a47281ee7759272580a-5-tindakan-hadapi-covid.jpeg
2BANNERNOTISPEMBERITAHUANGPCEM2022.png
Pendakwaan Jan - Disember 2023
HEBAHAN TERKINI PENGGUNAAN BORANG PENDAFTARAN PENGENDALI PERANCAH
Jata
HEBAHAN: PENGGUNAAN BORANG PENDAFTARAN SEBAGAI PENGENDALI PERANCAH (DS-07-003) DAN BORANG PENDAFTARAN SEBAGAI OPERATOR KREN (DS-07-006) TERKINI

Untuk makluman, terdapat pindaan Borang Pendaftaran Sebagai Pengendali Perancah (DS-07-003) dan Borang Pendaftaran Sebagai Operator Kren (DS-07-006). Sehubungan dengan itu, pengguna perlu memastikan permohonan yang dikemukakan kepada Pejabat JKKP Negeri adalah menggunakan borang terkini mulai 1 Mei 2022. Dokumen ini telah dikemaskini dan boleh diperolehi melalui :-
a) Laman Web Jabatan: Maklumat>> Orang Yang Kompten>>Operator Kren / Pengendali Perancah
b) Laman Web MyKKP: Panduan >> lain-Lain>>Operator Kren>> Pengendali Perancah

Harap Maklum.

previous arrow
next arrow

Poster - Construction Safety

 

Safe Lifting Work
tumb 03

Steps:

1. Conduct risk assessment.
2. Prepare Lifting Plan and safe work procedure.
3. Ensure lifting machine and lifting appliance or lifting gear are functional and in good condition.
4. Appoint trained and competent personal.
5. Establish work permit system.
6. Always monitor and supervise lifting work.

 

Lifting Team.

1. Supervisor
• Implement Lifting Plan.
• Supervise overall lifting works.
• Ensure lifting gear and lifting appliance are inspected periodically.
• Ensure lifting appliance and lifting gear are marked with Safe Working Load.

2. Operator Kren Crane Operator
• Provided with and maintain the operator log book.
• Provided with and maintain daily check list for components such as control mechanism, control switch, hydraulic hose and hydraulic fluid level.

3. Signalman/ Rigger
• Able to select the suitable and safe lifting gear.
• Able to direct crane and load movement.

 

 
Hierarchy of Fall Protection
tumb 01

The hierarchy of fall protection is the preferred order of control for all hazards. As the hirarchy progresses, so does the risk. Proper fall protection training and a rescue plan become mandatory.

1. Hazard Elimination
Preferred solution is to eliminate exposure to fall hazard.

2. Fall Restraint System
Physical barriers, like guardrails around unprotected edges and covers over holes.

3. Passive Fall Protection
Use personal protective equipment to restrict the worker’s range of movement so they cannot fall.

4. Fall Arrest System
Design for situation where exposure to a fall is not preventable. A fall is arrested within acceptable force and clearance.

5. Administrative Controls
Least preffered solution is the work practices or procedure that increase a worker’s awareness of a fall hazard.

 

 
Works that require Permit To Work (PTW)
tumb 04

1. Public safety.
2. Blasting work.
3. Falsework.
4. Work at height.
5. Work in confined space.
6. Work under the load.
7. Work at night.
8. Work with heavy machinery.
9. Excavation work.
10. Lifting work.
11. Demolition work.
12. Work near high voltage power lines.

Contents of PTW

1. Identifying hazards.
2. Assessing risks.
3. Control measures require to eliminate hazard if practical, evaluate risks that cannot be eliminated and put in place proportionate measures that control risks at source.
4. Determine who is at risk.
5. Prepare written PTW that includes:
    a. Competency level in all operation and any skill and expertise;
    b. List of isolation/ precautionary measures before work;
    c. List of prohibited activities;
    d. List of equipment and machinery;
    e. List of personal protective equipment to be used;
    f. Sequence of work;
    g. Emergency response plan; and
    h. List of personnel involved.
6. Conduct briefing to workers who work under PTW on hazards and control measures.
7. Ensure worker understand the PTW and implement it.
8. Display PTW at work site for worker’s reference.
9. Ensure clean and safe work area, and every safety switch is functional.

 

 
Formwork-falsework failure causes death; every duty holder must be responsibled.
tumb 02

Introduction

Formwork and falsework are used to shape and support wet concrete into required structure.

General responsibility of duty holders

1. Principle Constructor
   • manage, monitor and coordinate construction phase;
   • ensure effective communication with the client and designer;
   • appoint designer, consultant, constructor and formwork-falsework supervisor (designated person) who are competent;
   • prepare construction phase plan and encourage cooperation among constructors and coordinate their works;
   • provide and maintain formwork and falsework that are safe;
   • establish safe systems of work for use of formwork and falsework;
   • provide information, instruction, training and supervision;
   • provide site induction training;
   • establish safe access into and egress from the site;
   • engage with workers in OSH issues; and
   • provide welfare facilities.

 

2. Designer (Architect, Professional Engineer)
   • ensure the safe design of structure;
   • carry out any test, examination and measures to identify, eliminate or control risks; and
   • provide information to other duty holders.

3. Constructor
   • has similar responsibilities as principle constructor; and
   • plan, manage and monitor construction works under his control.

4.  Manufacturer, supplier and importer
   • ensure structure that are manufactured, supplied or imported is safe;
   • carry out any test, examination and measures to identify, eliminate or control risks; and
   • provide information to other duty holders.

5. Worker
   • ensure his safety and health and other person who may be affected by their work;
   • wear and use protective equipment and clothing provided by employer;
   • cooperate with his employer and any other duty holder; and
   • Report any hazard and risk to his employer.


Specific responsibility of duty holders

1. Main Constructor
   • ensure sufficient strength of foundation, floor and roof;
   • ensure full regulatory compliance with regard to design, construction, inspection, supervision, stripping and reshore; and
   • comply with generally accepted principles of sound and safe practice.

2.Designer (Architect, Professional Engineer)
   • design and prepare specification and drawings of formwork-falsework;
   • supervise construction and ensure stability of structure that he designed;
   • certify that the formwork and reshore are safe;
   • prepare specification for formwork stripping and give approval prior to stripping;
   • ensure that the formwork design has safe access for inspection; and
   • comply with generally accepted principles of sound and safe practice.

3. Formwork-Falsework Supervisor
   • supervise the construction formwork, falsework, braces and other supports;
   • carry out thorough inspection regularly;
   • carry out inspection of formwork, falsework, braces and other supports during placing of concrete;
   • ensure any unsafe condition discovered during inspections is remedied immediately;
   • keep all records of inspections;
   • comply with generally accepted principles of sound and safe practice.

4. Worker/ Installer
   • ensure the way it is erected or installed are safe when properly used; dan
   • comply with generally accepted principles of sound and safe practice.

Print Email

Slide 1

OSH Information Centre

safety alert   statistics    prosecution    fatal acc case

prosecution    HIGIEN    pet safety    construction en

kimia en    SME    SME    SME

.

Slide 1

OSH Information Centre

safety alert   statistics    prosecution    fatal acc case

prosecution    HIGIEN    pet safety    construction en

kimia en    SME    SME    SME

.

Video OSHMP25

Highlights Of Events

AKP
Libat Urus
Ceramah KKP
Libat Urus
ASEAN OSHNET DI QUEZON CITY, THE PHILIPPINES
KEJARI 4.0 DI BANGI AVENUE CONVENTION CENTRE
LAWATAN KE TAPAK MERDEKA 118
PROGRAM GOTONG ROYONG KUDAH (KUTIP SAMPAH SAMBIL RIADAH)
previous arrow
next arrow